Jessica Yadav

It is a process of electroplating a layer of zinc on the surface of steel. This process includes immersing a steel component in a solution containing zinc salts followed by application of electricity to induce electrochemical reaction on top of the steel. This is a method of galvanizing iron to prevent it from rusting.

zinc will react with sulphuric acid forming zinc sulphate dissolved in solution and releasing hydrogen gas.
Zn + conc. 2 H2SO4 ZnSO4 + SO2 + 2 H2O

Zinc is mainly used as a protective coating for iron and steel (galvanising). It is further used for the production of zinc alloys (e.g. brass), rolled zinc, zinc dust (a pigment and a reducing agent), and zinc compounds (e.g. zinc oxide).

• Zinc oxide is the industrially most important zinc compound. It is used in rubber (vulcanising, pigment), photocopy paper, chemicals and paints. Other uses are in floor coverings, in glasses, enamels, fabrics, plastics, lubricants, in rayon manufacture, and...

Reaction of Zn with H2SO4 depends on concentration of acid.

• For dilute acid, zinc sulphate and hydrogen gas at produced.

Zn + H2 SO4 ZnSO4 + H2

• For concentrated sulphuric acid, zinc sulphate , Sulphur dioxide and water are produced.

Zn + conc. 2 H2SO4 ZnSO4 + SO2 + 2 H2O

a)Galvanization:

The process of thin coating of zinc to the surface of iron sheets to prevent the rusting of iron by opposing the direct contact or iron to the atmosphere or buy forming electrochemical couple.

The galvanization process consists of the three basic steps i.e. surface preparation followed by fluxing and then it undergoes galvanizing. Material is loaded and then immersed in the molten zinc at degrees until the temperature is the same as zinc.

b) Sherardizing:

 Sherardizing is...